![Cloud PLM And SAP Digital Value Chain](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/production-2612056_1280-440x263.jpg)
Archive for November, 2019
![Cloud PLM And SAP Digital Value Chain](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/production-2612056_1280-440x263.jpg)
![The Future Of Voice-Controlled Product Lifecycle](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/calls-stat-440x94.png)
The Future Of Voice-Controlled Product Lifecycle
![AU2019 – Design and Manufacturing Keynote](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/au2019mfg-11-440x275.jpg)
AU2019 – Design and Manufacturing Keynote
![PTC’s Acquisition of Onshape: What are the Implications for Onshape?](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/onshape-impact-by-PTC-440x275.jpg)
PTC’s Acquisition of Onshape: What are the Implications for Onshape?
Acquisitions are part of every industry development these days. Usually, it is a major event in the company, product, technology, and business development for both sides. PTC acquired Onshape a few weeks ago. I published my article PTC+Onshape=what happened? I published it just after the acquisition. There are many articles…
![AU2019 General Keynote – Manufacturing of Buildings, Reinvent The Wheel And Intelligent Decisions](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/au2019-5-440x268.jpg)
AU2019 General Keynote – Manufacturing of Buildings, Reinvent The Wheel And Intelligent Decisions
AU2019 is in a full swing. I attended the general keynote session yesterday. From my experience, Andrew Anagnost, CEO of Autodesk presented the vision and gave a few very interesting examples of how we can get better in building, manufacturing and generally working together. My favorite theme in Andrew’s keynotes…
![Autodesk Forge DevCon 2019 – Microservices, API, DevOps and Data](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/devcon-11-440x269.jpg)
Autodesk Forge DevCon 2019 – Microservices, API, DevOps and Data
I’m attending Autodesk University 2019 in Las Vegas. If you never been at AU, this is an annual extravaganza of Autodesk technologies and products. On Monday, I attended the pre-conference event Forge DevCon. And Forge is all about developers. The event was kicked off by Jim Quanci, Sr. Director of…
![How PLM vendors plan to attack midsize manufacturing problems?](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/mfg-small-440x330.jpg)
How PLM vendors plan to attack midsize manufacturing problems?
It’s that time of the PLM development again – vendors have started to pay attention to small and medium-sized manufacturing companies. PLM interest to SMB market and small manufacturing businesses was going up and down for the last two decades. It has its own successes and failures but never delivered…
![Autodesk Forge Platform and Digital Twin Evolution](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/adsk-digital-twin-440x244.jpg)
Autodesk Forge Platform and Digital Twin Evolution
![PI PLMx 2019 – California views and PLM status quo](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/piplmx10-440x413.jpg)
PI PLMx 2019 – California views and PLM status quo
![How to navigate between SOLIDWORKS PDM Systems on premise and on the cloud?](https://beyondplm.wpenginepowered.com/wp-content/uploads/2019/11/solidworkspdm-440x720.jpg)